Fiore Skirt By Closet Core Patterns

The Fiore Skirt is a chic, high-waisted A-line skirt with just the right amount of flare and volume. A beginner friendly pattern with multiple variations, this elevated basic has tons of outfit potential.

Available in above or below the knee lengths, the Fiore Skirt has three views. View A is a simple flared skirt with an invisible zipper at the back. View B is an asymmetrical wrap skirt with single hip pocket. View C buttons up the front with curved patch pockets.

All views can be made with crisp wovens such as linen, chambray, denim, twill, poplin, lightweight canvas, and structured cottons. Please note: Views A and B can also be made with drapier fabrics like rayon challis, tencel, or silk, but the patch pocket for View C should not be sewn with fluid fabrics.

YARDAGE REQUIREMENTS (45"/1.14M FABRIC)

View A

0-8 = 1.75yd / 1.6m, 10-14 = 2yd / 1.85m, 16-20 = 2.25 yd / 2m

View B

0-8 = 2.25yd / 2m, 10-14 = 2.5yd / 2.25m, 16-20 = 2.75yd/2.5m

View C

0-8 = 2.25yd / 2m, 10-14 = 2.5yd / 2.25m, 16-20 = 2.75yd/2.5m

YARDAGE REQUIREMENTS (58"/1.5M FABRIC)

View A

0-20 = 1.5yd / 1.4m

View B

0-8 = 1.75yd / 1.6m, 10-20 = 2yd / 1.85m

View C

0-8 = 1.5yd / 1.4m, 10-20 = 1.75yd / 1.6m

Lightweight non-stretch fusible interfacing (1.25 yd / 1.1m)

View A = 7” (18cm) invisible zipper View B = 2 x buttons - 1/2” - 3/4” (13-19mm)

View B = scrap of 1/4” (6mm) twill tape or ribbon for loop closure (optional)

View C = 6-8 buttons - 1/2” (13mm)

Views B & C: Fray Stop & buttonhole chisel or seam ripper to open buttonholes

Polyester thread

Marking tool